Overview:
The BT-335 Bluetooth GPS receiver from GlobalSat utilizes the same platform as the ever popular BT-338 GPS receiver, which set the original benchmark standards for all SiRF III GPS receivers. With new improvements to it’s functionally and 16Mbit of internal memory, the BT-335 now can simultaneously record and store up to 60,000 waypoints as it navigates to various destinations when used with your favorite software.
Having all the quality features you would come to expect from a GlobalSat product, the BT-335 utilizes the SiRF Star III Low-Power GPS chipset, a high capacity 1700mAH Li-ion rechargeable/replaceable battery and a built-in patch antenna. The BT-335 works in conjunction with either your Smartphone, PDA or laptop and your favorite navigation software, to guide you across town, or across the country even when experiencing reduced visibility in urban canyons, or high foliage conditions.
With the addition of the built-in data logger to the GPS receiver function, GPS details of trips are recorded and stored within the BT-335 and can later be extracted to most any Bluetooth enabled laptop or desktop PC using the provided software utility. Once data has been saved to a local hard drive, the utility allows for the data to be exported into various formats such as CSV, TXT, RMC, GPX and KML for use in your specific application such as Google Earth or many other free web-based sites.
The included utility allows the user to:
* Set configuration parameters (time, date, Imperial/Metric, etc)
* Set recording intervals
* Delete recorded files and purge data on the BT-335 and much more!
This dual featured unit eliminates the need to purchase two separate devices, one for navigation and one for data logging, while remaining compact and easy to carry in a pocket or backpack. With a battery life of 25 hours of continuous use, a full day of driving, biking or hiking can be accomplished before a re-charge is needed. Both 110VAC wall and 12DC car chargers are included with the BT-335.
Specifications:
| Electrical Characteristics |
| Frequency |
L1, 1575.42 MHz |
| C/A Code |
1.023 MHz chip rate |
| Channels |
20 all-in-view tracking |
| Tracking Sensitivity |
-159 dBm |
| Accuracy |
| Position Horizontal |
10m 2D RMS (SA off) |
| WAAS enabled |
5m 2D RMS (SA off) |
| Time |
1 micro-second synchronized to GPS time |
| Velocity |
0.1m/sec 95% (SA off) |
| Datum |
| Datum |
WGS-84 |
| Acquisition Rate |
| Hot start |
1 sec., average (with ephemeris and almanac valid) |
| Warm start |
38 sec., average (with almanac but not ephemeris) |
| Cold start |
42 sec., average (neither almanac nor ephemeris) |
| Reacquisition |
0.1 sec. average (interruption recovery time) |
| Protocol |
| GPS Output Data |
NMEA 0183 protocol, and supports command: GGA(1sec),
GSA(1 sec), GSV(5 sec), RMC(1sec) ( VTG and GLL are
optional) |
| GPS transfer rate |
38400,N,8,1 |
| Dynamic Condition |
| Acceleration Limit |
Less than 4g |
| Altitude Limit |
18,000 meters (60,000 feet) max. |
| Velocity Limit |
515 meters/sec. (1,000 knots) max. |
| Jerk Limit |
20 m/sec**3 |
| Power |
| Voltage |
Built-in rechargeable battery(1650 mAh) and 5V DC input
charging circuit |
| Operation Time |
15 hr. After fully recharged, in continuous mode
>20 hr in trickle power mode |
| Physical Characteristics |
| Dimension |
72.5mm x 40.4mm x 26mm |
| Weight |
75g |
| Temperature |
| Operating |
-20°~ 60°C |
| Storage |
-30°~ 80°C |
| Humidity |
Up to 95% non-condensing |
Bluetooth specification
- Bluetooth V1.2 Compliant
- Supply Voltage : 2.8V ~ 3.3V
- Frequency Range : 2.402 ~ 2.480 GHz
- Receiver Sensitivity : -80 dBm
- Transmit Power : Class 2
- Transmitting Range : 10 m (Depends on environment)
- Power Consumption : 45 mA (Typical)
Data Logger:
Upload recorded data:
|
User can upload recorded data and save it to PC. |
Information Stored:
|
1. Only Position
2. Position, Time, Date, Speed.
3. Position, Time, Date, Speed, Altitude.
User programmable via software utility. |
| Speed Filter Threshold: |
Disables data save if speed falls below a threshold value. |
| Distance Filter |
Disable data save if data logger hasn’t moved greater than the selected radius. |
| Saving intervals: |
User defined saving interval (Time or Distance).
User programmable via utility. |
| Converting Output format |
(1) Exploring to KML ( Interface withGoogle Earth)
(2) Show recorded data on Google Maps
(3) Text format
(4) Excel file format
(5) NMEA183 file format |
| Configuration Wizard |
Using Configuration Wizard to help you quick adjust the settings. |
In the Box:
- GlobalSat BT-335 Bluetooth Data Logger x 1
- Car Charger x 1
- 110V AC Wall Charger
- CD (User Manual, Software Utility) x 1
Download
|
