The GlobalSat DG-100 GPS data logger records travel
data by using GPS signals. It is completely
self-contained with batteries, a built-in antenna (there's
also an external antenna port if you need it), and enough
internal memory to log up to 50,000 waypoints. The DG100
records time, date, speed, altitude and GPS location at your
preset intervals, which you can configure with the included
utility software. Designed using the SiRF Star III chipset,
the DG100 will provide accurate positioning and tracking for
your application.
Recorded GPS data is then downloaded to your computer
through its USB port. With the included software utility
(for WIN O/S/ only), a user can easily export their recorded
information in a variety of file formats such as .CSV, TXT
and .KML, for use on Google Earth and Google Maps.
Use the DG-100 in fleet management, marine navigational
aids, traveling and recreational use.
Features
• SiRF StarIII chipset 20 channels
• Store up to 50,000 waypoints
• Two (2) NiMh batteries for more than 20 hours continuous
operation.
• USB interface (includes WIN driver)
• Power On/Off button for easy use
• Three preset record intervals (Time/Distance) selectable
with slide switch
• Three LED's to show the status of GPS battery and memory
• MMCX port for
optional external GPS antenna
• USB GPS receiver function for laptops
• Configuration Wizard helps with easy record interval
configuration
• Metric or Imperial measurements
• Windows based software utility to
- Upload recorded data
- Change Recording Intervals (as low as 1 sec. or 1 foot and
higher)
- Configuration Settings
- Delete Recorded Data
Exporting Recorded Data:
(1) Export and interface with Google Earth (.kml)
(2) Show recorded data on Google Maps
(3) Text format (.txt)
(4) Excel file format (.csv)
(5) NMEA183
System Specifications
|
GENERAL |
|
|
GPS standard |
SiRF StarIII |
|
GPS Antenna |
Built-in patch antenna |
|
Operation time |
Up to 24 hrs |
|
Charge time |
7 hrs |
|
Battery Charging |
USB connector @ 350mah |
|
POWER BUTTON |
|
|
Power On/Off |
Press and hold for 3 second to On/Off the device. |
|
Instant Save |
Press button once to save a waypoint manually when
device is active. |
|
STATUS LED’S |
|
|
GPS status |
Flashing Green = GPS position is fixed
Steady Green = GPS position is not fixed |
|
Power status |
Solid Red = Device power ON
Flashing Red = Device has low battery power
Solid Amber = Battery is charging |
|
Memory status |
Flashing Blue = Memory is 2/3 full
Solid Blue = Memory is full |
|
TEMPERATURE |
|
|
Operating |
-20°C ~ 50°C (-4°F ~ 122°F) |
|
Storage |
-20°C ~ 35°C (-4°F~ 95°F) |
|
Humidity |
Operational up to 95% non-condensing |
|
SLIDE SWITCH |
|
|
One Slide Switch |
There are three customized setting of intervals:
A (interval 1 Time or Distance selectable)
B (interval 2 Time or Distance selectable)
C (interval 3 Time or Distance selectable) |
|
DATA CAPACITY |
|
|
Waypoints |
50,000 stored (stop record / overwrite data
selectable) |
|
BATTERY |
|
|
Battery Type |
(2) NiMh Rechargeable Batteries |
|
MECHANICAL |
|
|
Dimension |
3.15” 2.75” x’ 0.7’’ |
GPS Specifications
|
Electrical Characteristics |
|
GPS Chipset |
SiRF Star III |
|
Frequency |
L1, 1575.42 MHz |
|
C/A Code |
1.023 MHz chip rate |
|
Channels |
20 channel all-in-view tracking |
|
ACCURACY |
|
|
Position Horizontal |
10 meters, 2D RMS
1-5 meters 2D RMS, WAAS corrected |
|
Velocity |
0.1m/sec |
|
Time |
1 micro-second synchronized to GPS time |
|
DATUM |
|
Datum |
Default: WGS-84 |
|
ACQUISITION RATE |
|
Hot start |
1 sec., average |
|
|
Warm start |
38 sec., average |
|
|
Cold start |
42 sec., average |
|
|
Reacquisition |
0.1 sec. average |
|
|
PROTOCOL |
|
|
|
GPS Protocol |
Default: NMEA 0183 (Secondary: SiRF binary) |
|
GPS Output
format |
GGA(1sec), GSA(1sec), GSV(5sec), RMC(1sec), GLL,
VTG is optional |
|
DYNAMIC CONDITION |
|
|
Acceleration Limit |
Less than 4g |
|
|
Altitude Limit |
18,000 meters (60,000 feet) max. |
|
|
Velocity Limit |
515 meters/sec. (1,000 knots) max. |
| |
Jerk Limit |
20 m/sec**3 |
