SA-200 Marine GPS Antenna with Low Noise Amplifier

SA-200 is designed for the Marine Vessels mast or tall buildings that require long extra cables (up to 50 meters) without signal constraint to the GPS receivers.

Overview

SA-200 is the integration of the high performance GPS patch antenna and a state-of-the-art low noise amplifier into an extremely compact/fully waterproof enclosure and when connected to a GPS receiver with +5VDC antenna power it can provide excellent antenna signal amplification and out-band filtering with rejection for that receiver.

Specifications

Physical Constructions:

• Constructions: Polycarbonate radome enclosure (top & bottom base with rubber O-ring inbetween) Center feeds TNC connector for antenna output.
• Dimensions: 4.5" in diameter & 2.9" in height
• Weight: 220 grams (without cable)
• Standard Mounting:
  External flagpole mount (11cm-height threaded mast), an optional accessory kit
• Optional mounting plate:
  1. Cabin roof-mount with stainless steel base & shaft
  2. Rail side mount with stainless rod

Cable & Connector:

• RF: 10 meter RG58 A/U for standard SA-200, with 15~50 meters available for options. Cable connectors are hermetically molded plastics for waterproof and stain relief.
• Cable Pulling strength: 12Kg for 5sec.
• Connector available: BNC (standard), other types (optional)

Antenna Element:

• Center Frequency: 1575.42 MHz +/-1.023 MHz
• Polarization: R.H.C.P. (Right Handed Circular Polarization).
• Absolute Gain @ Zenith: +5 dB typical.
• Gain @ 10º Elevation: -1 dB typical.
• Axial Ratio: 3 dB max.
• Output VSWR: 1.5:1 max.
• Output Impedance: 50 Ω

Low Noise Amplifier:

• Center Frequency: 1575.42 MHz +/- 1.023 MHz
• Power Gain: 30 dB typical
• Bandwidth: 2 MHz min.
• Noise Figure: 1.5 max.
• Outer Band Attenuation: 20 dB min. @ Fo +/-50 MHz.
• Supply Voltages: 4.0~6.0V DC
• Current Consumption: 28+/-3mA
• VSWR: 1.5 max.
• Output Impedance: 50 Ω

Overall Performance: (antenna element, LNA & coax cable)

• Center Frequency: 1575.42 MHz.
• Gain: 27 dB typical
• Noise Figure: 2.0 max.
• Bandwidth: 2 MHz min.
• Axial Ratio: 3 dB max.
• VSWR: 1.5 max.
• Output Impedance: 50 Ω

Environmental Conditions:

• Operating Temperature: -40ºC~ +85ºC.
• Storage Temperature: -50ºC~ +90ºC.
• Relative Humidity: 95% non-condensing.
• Water Resistance: 100% waterproof.

(This specification is subject to change without prior notice.)