JCN053 Active GPS Antenna Module with Switch to External Antenna

This is an OEM active GPS antenna with a switch to an external antenna. Generally you can use this antenna as internal embedded antenna for your GPS receivers. It offer also an option for you to switch it to an external antenna.

Specifications

• Dieletric Antenna
  • Center Frequency 1575.42MHz±3 MHz
  • V.S.W.R 1.5:1
  • Band Width: ±5 MHz
  • Impendence: 50 ohm
  • Peak Gain > 3dBic Based on 7 x 7cm ground plane
  • Gain Coverage > -4dBic at -90° ~ +90°(over 75% Volume)
  • Polarization RHCP
• LNA/Filter
  • LNA Gain (Without cable) 10 ~ 30 dB Typical
  • Noise Figure 1.5dB
  • Filter Out Band Attenuation (f0=1575.42 MHz)
  • 7dB Min f0+/-20MHz ;
  • 20dB Min f0+/-50MHz
  • 30dB Min f0+/-100MHz
  • V.S.W.R < 2.0
  • DC Voltage 2.2V to 5.0V/other
  • DC Current: 5 ~ 15mA Max
• Mechanical
  • Weight ＜80gram
  • Size 37 x 29 x 6mm / 37 x 29 x 8mm
  • Cable RF1.13 or other
  • Connector SMA/SMB-M/SMC/BNC/FME/TNC/MCX /MMCX or other (Default SMA)
• Environmental
  • Working Temp -40^oC~+85^oC
  • Storage Temp. -45^oC~+100^oC
  • Vibration Sine sweep 1g(0-p)10~50~10Hz each axis