|
Mobile GPS Online is a leading supplier of GPS engine boards and antennas for the OEM industry, System Integrators and Products Developers. We're customer focused and committed to providing quality OEM GPS Engine Boards and antennas at very competitive price.
No matter how big is your GPS project, we can meet your needs. The following listings are our samples. For volume discounts and questions, please email us at sales@mobilegpsonline.com.
GPS Engine Boards
 |
|
ET332 20 Channel GPS Module (SiRF III)
SiRF StarIII high performance GPS Chip Set
Very high sensitivity (Tracking Sensitivity: -159 dBm)
Extremely fast TTFF (Time To First Fix) at low signal level
Compact size (40.5mm x 35 mm x 10mm) suitable for space-sensitive application
Support NMEA 0183 and SiRF binary protocol
Build-in SuperCap to reserve system data for rapid satellite acquisition.
Cold start under 40 seconds, average
Hot start under 1 seconds, average
WAAS & ENGOS is supported.
>> More ...
|
 |
|
RGM-3310 20 Channel GPS Module (SiRF III)
SiRF StarIII solution.
20 parallel channels.
Extreme fast TTFF at low signal level .
Operable from 3.3V/72mA continuous mode.
SMT type with stamp holes.
TCXO design.
>> More ...
|
|
|
|
ZX4125P 16 Channel GPS Engine Board with patch antenna on the top
ZX4125P (patch on top) is a high sensitivity ultra low power consumption cost efficient, compact size; plug & play GPS module board designed for a broad spectrum of OEM system applications. This GPS module receiver will track up to 16 satellites at a time while providing fast time-to-first-fix and 1Hz navigation updates. >> More ...
|
GPS and GSM Antennas
Most of our GPS antenna products are available with different connector types. Please get the external antenna connector specification from your GPS receivers' manual or check following links before you place your order.
If you want to customize the specifications and get a balk volume discount, please fill out the custom specification form and email us at sales@mobilegpsonline.com. We will make samples for you within two or three weeks.
 |
|
GPS Active Antenna
- High gain, low noise, low power consumption
- Input voltages 3.0 ~ 5.0V, max current 15mA, cable length 5m.
- Magnetic mounting
- Available with different connector types and customized cable length
- >> More ...
|
 |
|
Marine GPS Active Antenna
- High gain, low noise, low power consumption
- Input voltages 3.0 ~ 5.0V, max current 22mA, cable length 5m (extendable up to 100m).
- Magnetic mounting
- Available with different connector types and customized cable length
- >> More ...
|
 |
|
Omnidirectional GPS Antenna
- Omnidirectional reception pattern
- Excellent performance in all horizontal directions
- Compact Size: 19mm (D) x 83mm (H)
- Excellent Temperature Stability
- Low Noise Figure
- Ultra-High Sensitivity
- >> More ...
|
 |
|
GPS Re-Radiator Antenna Kit RK-304 (reradiating range: 30 meters)
RK-304 is an excellent GPS L1 band signal Reradiator to re-transmit GPS satellite outdoor receptions to an indoor environment. Designed to operate as a whole, the kit are composed of a highly-sensitive external GPS antenna, precisely calibrated amplifier circuit with Helix type indoor Reradiator and a built-in power supply regulator. The Helix type indoor antenna system allows multiple GPS receiver users to perform on-the-fly normal receiver operation within a closed environment, while the main GPS antenna is installed on an unmanned location outdoor. >> More ...
|
 |
|
GPS Re-Radiator Antenna RA-46 (reradiating range: 2 meters)
RA-46 is designed to operate as a whole. It includes a high-gain external GPS antenna, precisely calibrated amplifier circuit with Helix type indoor Reradiator and a power supply regulator to supply the system's power requirements. The unit is designed as Plug-&-Play hardware and it can be installed permanently or temporarily to a secured location by using either screw mount or glass suction cup for the indoor Helix antenna. >> More ...
|
 |
|
GPS Re-Radiator Antenna RA-45 (reradiating range: 2 meters)
RA-45 is an integral GPS Reradiator that allows a hand-held GPS Receiver to collect the L1 carrier signal inside buildings, vehicles, trucks or boats, by means of its un-detachable, built-in antenna. RA-45 serves as a perfect match for GPS handsets, such as Navman® iCN630™, Garmin® eTrex®, Magellan® SporTrak™ Series, GPS Companion™ and GPS 300 Series™. >> More ...
|
 |
|
GSM + GPS Active Antenna (for Vehicle Tracking Devices)
- Model: MGO-GAAGG-B
- High gain, low noise, low power consumption
- Input voltages 3.0 ~ 5.0V, max current 15mA, cable length 5m.
- Magnetic mounting
- Available with different connector types and customized cable length
- >> More ...
|
 |
|
GSM + GPS Active Antenna (for Vehicle Tracking Devices)
- Model: MGO-GAAGG-E
- High gain, low noise, low power consumption
- Input voltages 3.0 ~ 5.0V, max current 15mA, cable length 5m.
- Magnetic mounting
- Available with different connector types and customized cable length
- >> More ...
|
 |
|
GPS Passive Antenna
- Magnetic mounting, cable length 2m
- Available with different connector types
- >> More ...
|
 |
|
GPS Active Antenna without Housing
- High gain, low noise, low power consumption
- Input voltages 3.0 ~ 5.0V, max current 15mA, cable length 5m.
- Magnetic mounting
- Available with different connector types and customized cable length
- >> More ...
|
|
