GPS Solutions - Quality & Efficiency - Global Service
English  


WeBoost Home 3G 60dB Gain Signal Repeater up to 1,500 sq. ft.


$269.98


The weBoost Home 3G is the ideal repeater to bring you continuous signal in your home or small workspace. It's a simple and effective solution to maintain uninterrupted communication for all cellular devices, such as phones/tablets and data cards, in up to 2 rooms of your home or workplace. The Home 3G boosts voice and 3G data on every carrier in the USA and Canada. It also supports many different devices connected to multiple networks at the same time.

The weBoost Home 3G is designed to boost signal in a small inside area. Depending on outside signal strength and outside antenna positioning, it may be possible to get up to 1,500 sq ft. of coverage, but in practice, most installations will only cover one or two rooms inside.

The weBoost Home 3G is also ideal for situations like apartment living, where it is not possible to attach an antenna and cabling to the roof of the building. The outside panel antenna can be attached to the inside of a window, or the wall outside the window, if the roof is not available.

Features

  • Boosts signal for all U.S. & Canadian cell carriers
  • Friendly, U.S.-based customer support
  • All components needed for installation in one package
  • FCC & Industry Canada Certified

Benefits

  • Strong cellular signal across up to 1,500 sq ft. or 2 rooms
  • Reduce dropped calls and increase 3G data speed
  • Increase the battery life of your devices with up to 2 hours longer talk time
  • Small device footprint with a modern, attractive design
  • Ready-to-install window mount with suction cups makes installation easy if the antenna cannot be placed outside

Outdoor antenna

The outdoor antenna provided with the weBoost Home 3G kit is a cradle antenna (311141). Ideally, this antenna should be installed on an exterior wall or roof. The antenna sends the signal via a coaxial cable to the amplifier, which boosts the signal before sending it to the indoor antenna to be broadcast around your home or office. If it’s not possible to attach the antenna outside, it can be mounted to the inside of a window very quickly with the included ready-to-install window mount.

Indoor antenna

The indoor antenna included in this kit is the weBoost 301211 desktop antenna. The antenna features an attractive modern design and is small enough to sit unobtrusively on a desk.

Included cables

The kit comes with one 30’ RG6 Coax Cable (950630) and one 20’ RG6 Coax Cable (950620). It also includes the (971129) F-Female to SMA Male cable connector.

    Outdoor antenna mounting options

    The weBoost Home 3G kit includes a ready-to-use suction cup window mount for the outdoor antenna. It also includes a wall mount and a pole mount if you are able to attach the outdoor antenna outside.

    If the building you're installing the antenna on already has a pole for you to mount the antenna to, then you may not need any additional kind of mount. Otherwise you can find an appropriate mount on our Booster Accessories page. 

    Lightning Surge Protector

    We recommend using a lightning surge protector in most cases, but particularly if you'll be installing the kit in an area with frequent lightning. The lightning surge protector should be installed in line with the cable and near the amplifier, and should be properly grounded. 

    Kit contents

    The weBoost Home 3G kit contains the following:

    • weBoost Home 3G 60dB amplifier (473105)
    • weBoost Cradle Antenna (311141)
    • Pole mounting bracket for outdoor antenna
    • Wall mounting bracket for outdoor antenna
    • Ready-to-install window suction cups for outdoor antenna
    • Desktop Antenna (301211)
    • 30’ RG6 Coax Cable (950630)
    • 20’ RG6 Coax Cable (950620)
    • F-Female to SMA Male cable connector (971129)
    • 6V / 2.5A, AC Power Supply (859948)
    • Installation Guide

    How it works

    how a cell phone booster works
    1 - OUTDOOR ANTENNA

    The outdoor antenna receives and transmits signal to nearby cellphone towers. Outdoor antennas can be either directional or omni-directional.

    2 - CELLULAR AMPLIFIER

    The amplifier (or "repeater") boosts the signal coming to and from and going to the cell phone tower. The "gain" of the amplifier describes how strong the amplification is - you'll see that word scattered across our product pages.

    3 - INDOOR ANTENNA

    The indoor antenna rebroadcasts the signal inside the building. Some kits have more than one indoor antenna to help distribute the signal.

    Installation

    Installation of the weBoost Home 3G is quick and easy and can be done with no specialized tools. A detailed guide will take you through the installation procedure, and tell you how to connect the two antennas to the main amplifier. The antenna which receives the signal can be installed inside near a window, or for better performance outside on an exterior wall or roof.

    Product video

    Specifications

    SKU 473105
    Dimensions 6.3 x 1.4 x 4.2 in / 16 x 3.6 x 10.7 cm
    Frequency 824-849 / 869-894 / 1850-1910 / 1930-1990
    Gain 60 dB
    Impedance 50 Ohms (inside antenna) / 75 Ohms (outside antenna)
    Noise 3 dB nominal / 6 dB nominal
    Power supply 6V / 2.5A, AC Power Supply
    Connector type SMA-Female (inside antenna) / F-Female (outside antenna)
    Cable length 30' and 20'
    Cable type RG6
    Coverage 150 sq ft (1 coverage with weak signal)
    1000 sq ft (2 coverage with medium signal)
    1500 sq ft (3 coverage with strong signal)

    Resources

    Users ManualUsers Manual
    Quick Install GuideQuick Install Guide
    Spec SheetSpec Sheet
    • Model: CL473105F
    • Shipping Weight: 1lbs
    • 100 Units in Stock
    • Manufactured by: WeBoost

    Be the first to write a review.  Write a Review.

    This product was added to our catalog on Sunday 19 March, 2017.



    Who's Online

    There currently are 7 guests online.
    -->